How do I turn a Line into a polyline in AutoCAD?

How to convert LINE to Polyline

1. Type PEDIT and Press ENTER.
2. Type M and Press Enter.
3. Select objects and Press Enter.
4. Press Enter.
5. Type J and Press Enter.
6. Press Enter.
7. Press Esc (Escape)

How do you turn a Line into a polyline?

Converting a PolyLine to a Line In order to convert an existing multisegmented polyline to a line. Select the line the press the explode button on the ribbon – this will convert the line to a multi-segmented set of basic lines – each of which can be edited seperately.

How do I convert a line to a polygon in AutoCAD?

To Convert Polyline Objects to Polygons

1. Set the PROXYGRAPHICS system variable to 0.
2. On the command line, enter mappolylinetopolygon. Press Enter.
3. If you already had a selection set, the selected closed polylines are converted. If you did not have a selection set, select the polylines to convert. Press Enter.

How do I make an object a polyline in AutoCAD?

Converting Line to Polyline Type PE on the command line and press Enter to start polyline edit command, the command line will prompt you to select objects for making changes. Click on the object which you want to change to polyline, you can also select multiple objects by selecting Multiple from the command prompt.

How do I convert multiple lines to a polyline in AutoCAD?

To Join Polylines, Splines, Lines, and Arcs Into a Single…

1. Click Home tab Modify panel Edit Polyline. Find.
2. Select a polyline, spline, line, or arc to edit.
3. Enter j (Join).
4. Select one or more polylines, splines, lines, or arcs that are located end to end.
5. Press Enter to end the command.

How do you create a polyline in AutoCAD?

Draw a Polyline with Straight Segments

1. Click Home tab Draw panel Polyline. Find.
2. Specify the first point of the polyline.
3. Specify the endpoint of the first segment.
4. Continue specifying segment endpoints as needed.
5. Press Enter to end, or enter c to close the polyline.

How is the polyline different from a line in AutoCAD?

A line is a single straight object with 2 ends and no width. It can have a lineweight which is not the same as width. A polyline is a continuous object with multiple straight and arc segments. It can have a global width and segments can have individual widths.

Which command enables you to convert regular lines into a polyline?

How do I convert multiple lines to a polyline?

How do you make a polyline?

Draw a Boundary Polyline

1. Click Home tab Draw panel Boundary. Find.
2. In the Boundary Creation dialog box, Object Type list, select Polyline.
3. Click Pick Points. Specify points within each area to form a boundary polyline for each.
4. Press Enter to create the boundary polylines and end the command.