How many PSI is a hydrogen tank?

10,000 psi
To date, hydrogen tanks designed for fuel cell vehicles have been developed to store hydrogen at pressures of up to 10,000 psi (700 bar) to maximize vehicle range.

What happens when you put pressure on hydrogen?

Solid hydrogen was first predicted around 80 years ago. The theory goes that if you put hydrogen molecules under enough pressure they will solidify. During this process the hydrogen–hydrogen bonds will break and the molecules will fall apart into hydrogen atoms.

At what pressure does hydrogen become liquid?

Image Storage of hydrogen as a liquid requires cryogenic temperatures because the boiling point of hydrogen at one atmosphere pressure is -252.8°C.

How much hydrogen is needed to run a car?

Most fuel cell electric cars carry about 5 kg to 6 kg of hydrogen but go twice the distance of a modern internal combustion engine car with equivalent gas in the tank, which works out to a gasoline-per-gallon equivalent between $5 and $6.

How much hydrogen can a tank hold?

Typically, the high weight of the cylinders or tubes limit the maximum hydrogen load that can be transported. A tube trailer with steel cylinders can store up to 25,000 liters of hydrogen compressed to 200 bar (Wystrach GmbH, 2017a), which amounts to around 420 kg of hydrogen.

At what pressure does hydrogen liquify at room temperature?

At ambient pressure (1 atm), hydrogen liquifies at a temperature of −253 ◦C, leading to a significant increase in its density. Hydrogen has a critical temperature and pressure of −240 ◦C and 1.3 MPa, respectively.

What temp does hydrogen boil?

-423.2°F (-252.9°C)
Hydrogen/Boiling point

How much does compressed hydrogen weigh?

When compressed, the density of hydrogen at 35.0 MPa is about 23 kg/m3 and at 70.0 MPa is about 38 kg/m3. This leads to an energy density of 767 kWh/m3 (27 °C, 35 MPa). The volume of the storage tank is the biggest challenge, since the density of compressed hydrogen is lower than that of liquid hydrogen.

How much can you compress hydrogen?

A hydrogen density of 20 kg/m3 is reached at 300 bar. The volumetric density can be increased to around 40 up to 70 kg/m3 by compressing the gas to a pressure of up to 700 or 2000 bar, respectively.

https://www.youtube.com/watch?v=7bFJK5kU_UQ