What should be the minimum width of footpath while designing a bridge for rural areas?

4 of SP 20:2002 stipulated 3.75m width.

What is the width of footpath in highway bridge?

the width of the footpath can be suitably increased or a separate pedestrian bridge ~,in be considered depending on site condition. However minimum width of footpaih shall be 1.5m.

What is the minimum width of footpath as per IRC is?

Footpaths in residential areas require a minimum clear width of 1.8 m, which is enough space for two wheelchairs to pass each other. For commercial areas, the clear width should be at least 2.5 m (IRC:103-2012, 6.1. 5.2).

What is the minimum width of carriageway for single lane bridge?

Detailed Solution. The width of the carriageway for a bridge constructed for road traffic only, the width of the carriage should be minimum of 4.25 m for a single lane and 7.5 m for two lane ridge.

What is the width of a footpath?

Field-edge and cross-field public rights of way The minimum width you need to keep undisturbed is: 1.5 metres for a field edge footpath.

What is width of bridge?

Bridge width is the total width of all lanes and shoulders on the bridge, measured between the points on the bridge rail, curb, or other vertical elements that project the farthest onto the roadway (Figure 12). A second set of concerns is evident for longer bridges (say, greater than 500 feet in length).

How wide are two lane bridges?

2. Double-Lane Road Bridges. Use a 24-foot width as the minimum clear distance between traffic barriers for two-lane bridges, and in no case may the clear distance width be less than the approach roadway.

How wide is a footpath Australia?

We advise that footpath widths should be 1.8m wherever possible, and not less than 1.5m with passing spaces at intervals of not more than 6m, as recommended by Australian Standards.

What is the width of 4 lane road?

As per the guidelines of Indian Road Congress a four-lane highway should have a width of 23.5 metres, while a six-lane highway should be43.6 metres wide. The width of paved carriageway is 3.5m each i.e. 14 m .

What is the minimum width of a bridleway?

If a bridleway follows the edge of a field, it should not be disturbed (ploughed or planted) at all; in this case the protected strip is 3m. Otherwise, there is no set width, except for gates: on bridleways these must be at least 1.5m wide. Elsewhere, the test is what is required for passage.

How wide should a bridal path be?

How wide should a bridleway be? Bridleways: minimum 2m across a field, 3m field edge (alongside a vertical boundary) Byways: minimum 3m both cross-field and field edge.