Which type of bolt is use if there is no place to accommodate the nut?

Ans. Tap bolts are directly threaded into the clamped parts and does not require any nut.

How do you tighten a bolt?

Try to pick a wrench that is the closest size to the bolt and try different combinations of coins to get a snug fit. If the wrench is too small you can take a long nut and a bolt, screw the nut onto the bolt and tighten the bolt around the nut you want to tighten or loosen.

How do you screw in hard to reach places?

If you want to use a small screw in a place that’s hard to reach, it’s often difficult to hold the screw in place. Your fingers are then in the way when you want to tighten the screw. A good solution is to push the screw through the teeth of a pocket comb and use this as a ‘third hand’.

How do you tighten a bolt nut?

Hold the shaft of the spanner and turn it clockwise as far as you can. If it is a ratchet spanner, turn it back anticlockwise when you can’t go any further, then turn it clockwise again to tighten it. Keep doing this until the nut is too tight to turn easily.

How do you screw a nut into a screw?

Place the nut on the end of the threaded shaft. Be sure the washer is aligned properly with the threads on the bolt and then begin to twist it clockwise until it reaches the washer. Tighten the nut with your fingers to secure it. Complete the fastening process by using a wrench that fits the size of the nut.

How do you determine if you are using the correct type of bolts and nut in a certain part of an aircraft?

Identification and Coding AN-type aircraft bolts can be identified by the code markings on the bolt heads. The markings generally denote the bolt manufacturer, the material of which the bolt is made, and whether the bolt is a standard AN-type or a special purpose bolt.

How do bolt nuts work?

Nuts and bolts are designed to hold two or more objects together. They work by inserting a bolt through the two objects and then fastening a nut at the other end of the bolt.