How do I fix a hard drive that is not detected?

Step 1 – Make sure the SATA cable or USB cable is tightly connected to the internal or external hard disk drive and SATA port or the USB port on the computer. Step 2 -If that doesn’t work, try another SATA or USB port on the computer’s motherboard.

How do I install a Dell hard drive?

Starts here2:53How to install a Hard Drive on Dell Desktop (Official Dell Tech Support)YouTubeStart of suggested clipEnd of suggested clip44 second suggested clipComputer. To make sure the new hard drive has been properly installed. You need to check the BIOS.MoreComputer. To make sure the new hard drive has been properly installed. You need to check the BIOS. Turn on the computer and press the f2 key on the keyboard.

Why is my hard drive not showing up in BIOS?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

How do I know if my hard drive is working in BIOS?

During startup, hold F2 to enter the BIOS Setup screen. Check whether your hard drive is listed under Bootable Device. If your hard drive isn’t listed, this indicates that there are no bootable system files on the hard drive.

How do I fix my Dell laptop hard drive failure?

Starts here4:28How To Fix A Dell With A Hard Disk Drive Failure or Primary – YouTubeYouTube

How do I enable hard drive in Dell BIOS?

Does the hard drive appear in the BIOS? Tapping the F2 key during startup takes you into the BIOS on most Dell’s PCs. Alternately, you can tap the F12 key and choose the BIOS from the boot menu. If the hard drive is reported correctly in the BIOS, then continue with the troubleshooting.