Is gasket maker the same as silicone?

Most “sealers” and “gasket makers” are RTV Silicone, same thing. Surfaces need to be clean and dry, apply sealer to mating surfaces / gasket sides ( I coat them all ) and wait a few minutes, install parts, tighten bolts in sequence, wait a few more minutes, re-tighten bolts to spec .. cure overnight.

Should I use gasket maker with a gasket?

A general rule, if you are using gasket sealant, you don’t need a lot! Automotive applications commonly use gasket sealant alongside solid gaskets, as they are repairing older parts. Gasket sealant can be used to make cheaper gasket materials more robust, increasing adhesion and chemical/water resistance.

Should I use silicone gasket?

NEVER use silicone on both sides of the gasket, the gasket will slip and slide all over the place instead of staying put and clamping down. Another substitute for the high tack is Copper Coat (in the copper spray can). This works really well for head gaskets since it’s a light film.

Can you use gasket maker on exhaust?

Permatex Ultra Copper Maximum Temperature RTV Silicone Gasket Maker is designed for high operating temperatures, turbocharger applications, and exhaust systems. The most advanced, high temp RTV silicone gasket maker available.

Can I use gasket maker on thermostat housing?

Permatex Water Pump and Thermostat RTV Silicone Gasket is a non-corrosive, sensor-safe RTV silicone gasket material formulated specifically for water pumps and thermostat housings. Permatex always has the right gasket maker for your application.

Do you put silicone on a head gasket?

The purpose of a gasket is to create a perfect seal between two surfaces, the surfaces to be joined should be a smooth as possible and no silicone is needed or gasket sealer.

Do I need to put silicone on water pump gasket?

When changing a water pump, replace all old gaskets and seals with new ones. If your new pump comes with a seal, make sure it’s in impeccable condition before installing it. Perhaps you’re tempted to apply sealant to an O-ring or a dry seal, just to be ‘extra safe’, but these seals don’t need sealant!

What is a silicone gasket?

Silicone rubber gaskets are high-performance mechanical seals with an extraordinary resistance to extreme temperatures. Silicone gaskets are used to prevent leaks between different substrate sections in a wide range of applications.

Can I use silicone on my exhaust?

Hi temp silicone will be fine.