Do you need mark setter for decal?

Setter and softer help best on waterslides that go over curved/uneven shapes/surfaces rather than flat areas of the piece. They help the decal contour and stick to the piece well as if painted on. But its also a good idea to just go ahead and use setter and softer for all the decals you use anywhere on the kit.

Does Mark softer work on sticker decals?

Mr Mark Softer will eat through any paint if it puddles up! It’s one of the “hotter” decal solutions out there and that’s why it works really well on thick decals!

What does decal setter do?

Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model part where the parts either have a rough or irregular surface. First, the area to which the decal will be affixed is painted and then the decal is applied.

How do you use the MR hobby mark setter?

Mark Softer to the area where the decal will go using the brush attached to the bottle cap. Apply the decal over this area. Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and ensuring that the decal down fast. The decal will stick perfectly, even on uneven or curved surfaces.

How do you use Tamiya decal adhesive?

To use it, just place a little bit of it on your model and then place the decal on top of it. It is served in a 10ml bottle. Additional details for the Decal Adhesive Softener Type decal products: Manufactured by Tamiya with reference TAM87193 (also listed as 4950344871933 and 87193).

How do you use Mark fit decal solution?

1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.