Does OSHA require you to wear a harness in a boom lift?

Employers must ensure that employees using personal fall arrest systems while working on aerial lifts at heights six feet or more above a lower level comply with §1926.502(d) of subpart M, specifically: Use of a body harness with a lanyard (fall arrest system).

Does OSHA require a harness?

A personal fall arrest system/safety harness is required by OSHA whenever the employee is 6 feet above ground and is not protected by a guardrail or safety net, during the assembly or removal of scaffolding with incomplete handrails systems and more than 10 feet above the ground, and when using any aerial equipment …

Which OSHA standard requires workers using an aerial lift to attach their lanyard to the boom or basket?

29 CFR 1910.67
The standard for aerial lifts, 29 CFR 1910.67, requires employees working from the basket of an aerial lift to be tied off with a body belt and lanyard attached to the boom or basket.

Can you use a lanyard in a boom lift?

A body belt used in a fall arrest system or with a self-retracting lifeline/lanyard is not allowed on any aerial lift.

Does OSHA require safety harness scissor lift?

While OSHA does not require scissor lift workers to wear a harness or other PFRS, that doesn’t mean you shouldn’t. After all, there are many hazards associated with scissor lift use. That’s one reason OSHA requires scissor lifts to have guardrail systems.

What does OSHA consider aerial lifts?

Aerial equipment may be made of metal, wood, fiberglass reinforced plastic (FRP), or other material; may be powered or manually operated; and are deemed to be aerial lifts whether or not they are capable of rotating about a substantially vertical axis.

At what height does OSHA require a harness?

six feet
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.

Does OSHA require harnesses on scaffolding?

Fall protection approved by OSHA includes guardrails, safety net systems, and personal fall arrest systems (i.e. safety harnesses). For scaffold work, employees must have fall protection when working at a height of 10 feet or more above a lower level.

Can you use a boom lift as a tie off point?

While some manufacturers allow the boom lift to be used as a fall-arrest anchor while working from the structure, it is never allowable to belt-off to adjacent structures or poles while in the platform.

Can you tie off to a boom lift?

Answer: OSHA standards do not prohibit employees from exiting or entering an aerial lift basket that rests on or adjacent to an elevated surface. Section 1926.453(b)(2)(v) requires that employees working from aerial lifts be tied-off.

Does OSHA require retractable lanyards?

The retractable lanyard stops the fall within 2 feet. Under OSHA’s regulations, a retractable lanyard that stops the fall within 2 feet must have a tensile strength of 3,000 lbs. When using such a lanyard, is an anchorage with a capacity of 3,000 lbs.

Can you use an aerial lift as an anchor point?

Can You Use a Crane Hook As an Anchor Point? A crane hook does not meet OSHA requirements for anchor points. Therefore, aerial lift operators should not use a crane hook as an anchor point.