How do you dump a program into a microcontroller?

Steps to program the microcontroller:

1. Purchase a microcontroller capable of programming the microcontroller you are using.
2. Install the software which comes with the programmer.
3. Connect the programmer with the PC and start the software.
4. Read the hex file which you want to burn in the software of the programmer.

How do I run a code in Keil?

Click the Run button on the toolbar to begin executing your target program in the µVision debugger. The Run button executes code until a breakpoint is reached. Click the Stop button on the toolbar to halt program execution. In the Output Window, type g,label to execute program code and stop when label is reached.

How to program at89s51 (52) with Arduino IDE?

Pin 6 (P1.5) on the 8051 to pin 11 on the Arduino (MOSI). Upload the sketch contained in the repository and you can start programming your AT89S51 (52)! The Arduino IDE comes with avrdude preinstalled.

How to use avrdude with the at89s51 (52)?

First, upload the sketch named “ArduinoISP” onto your arduino. The sketch can be found under “File” -> “Examples” -> “11.ArduinoISP” in the Arduino IDE. Then, you have to customize the configuration file of avrdude in order to enable support for our AT89S51 (52). You can download an already modified configuration on this page.

How to dump processes in Windows 8?

Note that in Windows 7 and earlier the processes are listed on the “Processes” tab, and in Windows 8 and later they are listed on the “Details” tab. Once you can see the hung process in Task Manager, right-click on the process and select “Create dump” to write a full dump of this process.

Are the default Mini-dumps sufficient for crashing analysis?

However, these default mini-dumps are insufficient in many situations for making a complete analysis for why a process crashed.