How much weight can a RCC roof hold?

Normally RCC roofs in India are designed for load of 150kg /SQM , so if you distribute the load to 6 SQM or say 10 feet x 6 feet area , so you can place it by widening the base of aquarium.

How much weight I can put on my roof?

Per those guidelines, an ordinary roof on a home needs to hold 20 pounds per square foot at absolute minimum. Depending on your type of roof and what it is used for, it may be required to hold more weight. For example, a flat roof intended to hold a home garden needs to hold 100 pounds per square foot.

How much weight can I put on my flat roof?

A minimum requirement is for roofs to be able to support a concentrated weight of 300lbs. Concentrated weight means that this load is placed directly on a single area on the roof. A good estimate when considering a commercial flat roof is that it should be able to support a 300lb HVAC unit in a single 2.5×2.5ft space.

What is the load bearing capacity of RCC floor?

1. Loads on the RCC Slab. Live load on Slab= 2.4 KN/m2 (Office use; per Table 4-1 in ASCE standard (ASCE/SEI 10-7)).

Can you step anywhere on a roof?

However, you should avoid walking on your roof whenever possible. There are safety and insurance issues your risk by stepping on your own roof. Also, you could damage your shingles or other roof materials by stepping on them.

Is a roof strong enough to stand on?

Many traditional roofs are designed to hold a minimum of 20 pounds of weight per square foot. Some roofs are designed to hold more weight. For instance, a roof that was designed with the intent of adding a rooftop deck should be able to support at least 55 pounds of weight per square foot.

How much weight will 6 inches of concrete support?

Determine the Pad’s Thickness For example, a 6-inch pad with a compression strength of 700 psi can support 1,105 psi. If it was 7 inches thick, it could support 1,194 psi, and if it was 12-inches thick, it could support 1,563 psi.

Can I walk on my flat roof?

In general, all types of roofs aren’t safe to walk on, especially if you don’t have the necessary training. A commercial flat roof can be used for recreational purposes or to create extra storage space, but it must be constructed to withstand the foot traffic and the extra weight of any equipment you bring up.

Are flat roofs load bearing?

Flat roofs are a popular choice for garages, extensions, garden offices, and outbuildings. A timber frame forms the supporting structure with flat roof joists across the short side of the roof providing the load bearing element of the roof.

How much floor support do you need for a fish tank?

Floor support depends on several factors, including the floor layout and aquarium size. You don’t need to worry about floor safety unless you have a monster-sized fish tank holding 150 gallons. You can easily place fish tanks with less than 60 gallons of water anywhere in your home.

How big of an aquarium can you put on the floor?

If you have a strong structural foundation and no framing defects, you can also place up to a 125-gallon tank with no problems! Avoid placing anything larger than 150-gallons on your floor without reinforcing it with extra bracing. Here are some guidelines on aquarium sizes:

How much does a 175 gallon aquarium weigh?

Keep in mind that 1 gallon of water equals 8.34 pounds, so you need to ensure that your floor can handle the weight of your new aquarium. A 175-gallon aquarium, when filled with water, accessories, and gravel, weighs over 2,000 pounds.

What is the average weight of a small aquarium?

Small Aquariums Tank Size L x W x H Empty Weight Filled Weight 2.5-gallon 12″ x 6″ x 8″ 3 lbs. 27 lbs. 5-gallon 16″ x 8″ x 10″ 7 lbs. 62 lbs. 10-gallon (leader) 20″ x 10″ x 12″ 11 lbs. 111 lbs. 15-gallon 24″ x 12″ x 12″ 21 lbs. 170 lbs.