What is the advantage of T section of a beam?

T-beam casting with slab as we know so Its flange takes compressive stress and that mean It will resist more sagging moment of beam. Depth of beam is reduced as compare to ordinary beam so better headroom advantage. Over longer span T-beam is used rather than ordinary beam for reducing the deflection of beam.

Where do we use T beams?

Tee beam is mostly used in the construction sector. A tee beam is mostly a load-bearing structure made up of reinforced concrete or wood, or metal with a T-shaped cross-section. The top portion of the T-shaped cross-section is a compression resisting member.

What is the value of the effective depth of a T beam for heavy loads?

For continuous beams, the overall depth is assumed as follows : For light loads = 1/15 to 1/20 of the span. For medium loads = 1/12 to 1/15 of the span. For heavy loads = 1/10 to 1/12 of the span.

What is the disadvantages of T-beam?

1. There is a considerable increase in the shear stress at the junction of the flange and the web of the beam due to the change in cross section. Since the beam slab is monolithic (rigid), it becomes very weak in resisting lateral shear forces. …

What are the disadvantages of beam bridges?

Disadvantages of beam bridges:

• Can be expensive, even for fairly short spans. A cheap material for beam bridges is concrete.
• Very expensive for long spans, because piers have to be built.
• It is not always possible to build support piers.

What is rib of T-beam?

The beam consists of a flange and a rib in the form of a T, generally made of RC concrete or metal is known as T-beam. The top part of the Slab which acts along the beam to resist the compressive stress is called flange. The part which lies below the slab and resists the shear stress is called rib.

What is effective T-beam width?

According to 318-19, the effective flange width of an internal T-beam should not exceed the smallest of: 1- One-fourth the clear span length of the beam, L/4. 2- Width of web plus 16 times slab thickness, bw +16hf .

What is effective depth in RCC?

Summary. Effective Depth (d) – The effective depth (d) of a reinforced concrete floor slab is the distance from the compression face to the centre of the tensile steel when an element is subjected to a bending moment.

What are the advantages of fixed beam?

What are the advantages of fixed beams? (i) For the same loading, the maximum deflection of a fixed beam is less than that of a simply supported beam. (ii) For the same loading, the fixed beam is subjected to lesser maximum bending moment. (iii) The slope at both ends of a fixed beam is zero.

What are the advantages of I beams?

The shape of I beams makes them excellent for unidirectional bending parallel to the web. The horizontal flanges resist the bending movement, while the web resists the shear stress. They can take various types of loads and shear stresses without buckling.

https://www.youtube.com/watch?v=F2GOKOrL9Q0