How long will 5mm rear brake pads last?

It depends on your braking habits ,they may last 12 months as they are not subject to the same force as Front Pads . There is usually a metal depth guide on the pad made of spring Steel which will Squeal when it comes in contact with your Disc meaning that the pad friction material is at minimum thickness.

How many mm should rear brake pads be?

Ideally, your brake pads should be thicker than 6.4 mm (¼ inches) for proper functioning. If it’s thinner than this, consider getting a replacement soon. Most car mechanics also agree that the bare minimum brake pad thickness is 3.2 mm (⅛ inches).

How long will 3mm rear brake pads last?

Depends on the quality, the type of material and how much you want to stand on the brakes. 3mm is a little over a tenth of an inch. A cautious driver with a gentle foot it could go for a couple of months. A young man with a high performance car might go a week.

What is the legal minimum brake pad thickness?

3mm
A new brake pad will be around 10mm thick. Most manufacturers and mechanics will all agree, though, that you should probably replace your brake pads once they wear down to 3mm.

How many mm do brake pads start with?

Most pads start their life with about 12 mm of friction material, and most mechanics suggest replacing them when they get to 3 or 4 mm. You should replace your car’s brake pads before the backing plate begins gouging out the brake rotors — a complication that can make the job even more expensive.

What is the legal brake pad limit?

1.5 millimetres
The legal limit of a brake is 1.5 millimetres. The closer you get to the legal limit, the weaker the performance of the brake pad. You’ll usually wear down the brake pad from new to the legal limit within 40,000 miles. It can be possible to check a brake pad’s condition through the wheels of your car.

How thin should brake pads be before replacing?

How thin can brake pads get?

Brake Pads Appear To Be Thin. For the braking system on your automobile to function properly, the brake pads should not be allowed to get thinner than ¼ inch. Brake pad thickness plays an essential role in road safety. Brake pads that measure 1⁄8 inch in thickness have reached the end of their recommended wear limit.

What is the minimum brake pad thickness?

Your brake pads’ minimum thickness should be at least 6.4 millimeters. Above all else, you do not want the thickness to get any less than 3.2 millimeters or it will be very dangerous to drive.